Mold bending is usually completed on a CNC bending machine. Workers or robots are required to assist in the bending process. The bending accuracy depends on the skill of the technician or the quality of the robot. This bending method It is widely used in the production of small parts with a single product category and simple process.
In order to keep the various parts of the CNC machine tool in good condition, it is very important to insist on regular maintenance except for the timely repair of the failure. Careful maintenance can keep the equipment in good condition at all times and delay the deterioration process.
Standardize the correct use and maintenance of CNC bending machine equipment by employees, ensure the normal operation of CNC bending machine and personnel safety, effectively reduce the failure rate and improve the efficiency of equipment use. The equipment user is responsible for the daily mainten
The bending radius of the bending machine parts: When using free bending, the bending radius is 0.156 times the opening distance of the die. In the free bending process, the opening distance of the die should be 8 times the thickness of the metal material. If the bending radius is almost as small as
How to select a cnc press brake bending machine？ First of all depending on what parts you need to produce, the main point is to buy a machine that can complete the processing task with a short worktable and a small tonnage. Achieve maximum efficiency and minimum cost. Carefully consider the materia
The implementation of standard operating procedures is convenient to ensure consistency and reduce multiple set-up parts and the resulting material waste. These SOPs not only help to shorten the preparation time as much as possible, but also improve the consistency of the bending sequence operation,
When using the CNC press brake bending machine for work, it is very likely that there will be some use errors. At this time, we must pay attention to it. Once the bending machine has a problem, it must be checked. The first step is to check whether the mold used by the bending machine is worn or dam
In the bending process of the CNC Press Brake bending machine, based on the existing technology, the biggest problem is how to reduce the preparation time before the actual processing, especially when the product needs to be repeatedly processed. For the first processing, in addition to confirming t
The solution： 1. Debug some parameters of the Y-axis bending. The bending parameters of the CNC Press Brake bending machine should be adjusted according to the actual situation. Part of the gain is too small, the slider will not move or not be in place, if the slider is too large, the parameter will