The hydraulic swing beam shearing machine can be operated in jog, single and continuous motion options.
Jog: Select the jog operation gear, step on the foot pedal to slow forward, press down the shearing mechanism to automatically press down, touch the stroke switch to stop the press; during the process of pressing down, the pedal is released and the pedal is slow to advance and stops at the current operating position; Press down the pedal to return, the shearing mechanism will automatically return, and the stroke will stop the return; during the return process, release the pedal to return and stop at the current return position.
Single: Set the pressure holding time, depressurization time, the forward and backward distance of the horizontal stop, adjust the position of the horizontal stop; select the single operation gear, the shearing mechanism is not in the upper stroke switch position, and the upper stroke switch position is automatically returned first; step on The pedal advances slowly, and the shearing mechanism is automatically pressed down; when the stroke switch is touched, the horizontal stopper mechanism moves back a set distance and automatically maintains pressure; the pressure is automatically relieved when the pressure is held, and the pressure is released when the pressure is pressed. The shearing mechanism automatically returns, and the horizontal stopper mechanism automatically advances the set distance; hitting the travel switch, the single shearing action ends.
Continuous: Set the pressure holding time, pressure relief time, the advance and retreat distance of the horizontal stop, adjust the position of the horizontal stop; Set the number of work steps, the material position and the number of shears for each work step;
Select the continuous operation gear position, the downward pressure shearing mechanism is not at the upper stroke switch position, first automatically return to the upper stroke switch position; step on the pedal to slow forward, the downward pressure shearing mechanism automatically presses down; when the stroke switch is touched, the horizontal stopper mechanism Set the distance back, and automatically hold the pressure at the same time; when the pressure hold time is up, the pressure will be released automatically, and when the pressure is released, the shearing mechanism will return automatically, and the horizontal stopper mechanism will automatically advance to the set distance; when the stroke switch is touched, one cut The cutting action is over, and the next cutting is performed.
The current step of cutting is completed, and the stroke switch is touched, the horizontal stop position is automatically adjusted, and the next step of cutting is entered.
All working steps are completed, and the stroke switch is touched, and the continuous cutting action ends.
Rules of Use
Hydraulic shearing machine should regularly check whether the fasteners are loose. If there is any looseness, they should be tightened in time after confirming the correct position. The lubricating oil in the auxiliary reduction case must be kept clean and at a normal oil level.
When the new machine is used for the first time for 15-20 days, it must be replaced with new oil. Generally, it is updated once a year. Always check whether the grounding of the motor is good, whether the wire insulation is good, and a protective conduit must be added outside the wire. In order to ensure the normal operation of the motor and prevent accidental failure, the motor should be regularly maintained according to the frequency of use of the plate bending machine and the lubricant should be replaced.
The operator must be familiar with the structure and performance of the hydraulic shears. Pay attention to the safe use rules and strictly observe the instructions to ensure correct use.